Milling & Drilling

WS 203 / WS 203 HF | Water Slot Milling Machine

Semi-Automatic / Automatic Feed

Accurate drainage and ventilation slot milling for frames and sashes.

Enhancing production quality by adding a dedicated drainage-slot milling station to ensure every window and door drains and ventilates correctly. Ideal for streamlining repetitive, precision-critical tasks.

– Automatic milling and drilling movement for consistent slot accuracy
– Smooth milling motion controlled via the support table for precise feed
– Dual milling motors with soft-start function for clean, burr-free results
– Integrated drilling function allows combined slot and hole machining
– Large, stable support table for secure profile positioning
– Adjustable angle range from 0° to 65° for versatile slotting configurations
– Individual connection of milling units for flexible setup
– Low-maintenance design for continuous daily use

– Maintenance-free high-frequency motors (HF version) for longer life and quieter operation
– Optional soundproof hood for reduced noise and improved operator comfort

N/A

AKFU-330 | End Milling Machine

Semi-Automatic / Hydro-Pneumatic Feed

Heavy-duty precision milling for reinforced and decorative profiles.

Looking to improve milling speed and surface quality when processing larger, reinforced, or timber-look (HFL) profiles. Ideal for workshops focused on faster cycle times and consistent results under heavier loads.

– Special HFL profile stop system for uniform decorative milling
– Infinitely adjustable hydro-pneumatic feed for smooth, vibration-free operation
– Large milling-cutter capacity up to Ø 330 mm for wider profiles
– Quick-change cutter system with counter bearing for rapid tool swaps
– Handles profiles up to 130 mm high × 125 mm wide
– Two vertical pneumatic clamping units ensure perfect stability
– Robust, low-vibration frame and powerful motor with integrated brake
– Infinitely variable profile stop using handwheel and counter for precise repeatability

– Double-bar machining at 90° for higher throughput
– Quick-change sleeves Ø 30 / 32 / 40 mm
– Extraction system for clean, dust-free operation

N/A

AKFU-250 | End Milling Machine

Semi-Automatic / Hydro-Pneumatic Feed

Versatile, precise milling for transoms, couplers, and door profiles.

Improving profile preparation speed and accuracy before welding, or replacing manual setups with a faster, repeatable end-milling solution that maintains clean, vibration-free results.

– Adjustable stop angle from 0°–20° for notch milling on window and door -profiles
– Infinitely variable hydro-pneumatic feed for smooth, controlled cutting pressure
– Quick-change milling-cutter system for reduced downtime
– Counter bearing ensures clean, accurate milling results
– Profile stop adjustable via handwheel and counter for repeat precision
– Handles profile heights up to 130 mm with two vertical pneumatic clamps
– Heavy-duty, low-vibration frame for stability and long-term accuracy
– Powerful motor with integrated brake for reliable, consistent performance

– Double-bar machining at 90° for higher throughput
– Quick-change sleeves Ø 30 / 32 / 40 mm
– Digital angle display for faster setup and angle accuracy
– Profile height extension for taller sections
– Adjustable lateral clamping unit for flexible positioning

N/A

AKFU-250-TWL | End Milling Machine

Semi-Automatic / PLC-Controlled

High-precision dual-rotation milling for timber-look (TWL) profiles.

Producing decorative timber-look profiles and need perfect mirrored 45° milling with minimal manual setup. Ideal for achieving seamless visual alignment and consistent surface quality across high-end product lines.

– Clockwise and anti-clockwise milling rotation with PLC control for perfect mirrored results
– Patented profile-stop and retaining system for uniform accuracy across every profile
– Infinitely variable hydro-pneumatic feed for smooth, vibration-free milling
– Quick-change cutter system with pneumatic clamping and integrated counterholder
– Handles profiles up to 130 mm high with horizontal and vertical clamping at pre-pressure
– Adjustable profile stop with turret system for repeatable positioning
– Stable, heavy-duty frame ensures low vibration and extended precision
– High-power milling motor with integrated brake for consistent performance

– Extraction system for clean, dust-free operation
– Quick-change sleeves Ø 32 mm / 40 mm for flexible tool configuration

N/A

M80 / M110-12 / M110-14 | End Milling Machines

Manual / Semi-Automatic

Compact, reliable milling solutions for PVC and aluminium profiles.

Looking for a practical, easy-to-use milling station that delivers clean, repeatable results on both PVC and aluminium profiles, ideal for daily production or as a secondary machine for specialised milling tasks.

– Adjustable stop angle from 45° to 0° to 45° for flexible milling positions
– Quick-change milling-cutter system for fast tool replacement and minimal downtime
– Handles profile heights up to 120 mm
– Six-way adjustable turret stop for precise, repeatable depth settings
– Two vertical clamping units for secure, stable profile positioning
– Compact machine frame with integrated storage tray for tools and accessories
– Powerful, smooth-running motor for consistent performance
– Suitable for both PVC and aluminium profile processing

– Integrated spraying device for aluminium machining
– Coolant system for improved cutting quality and tool life

Variants:
M80 – Manual feed, for light-duty PVC or aluminium milling (0°–45°)
M110-12 – Manual feed, 45°–90°–45° adjustable stop for general use
M110-14 – Hydro-pneumatic feed for smoother operation and faster cycle times

N/A

GSU 100 / GSU-K 100 | Handle Drilling and Lock Case Milling Machine

Semi-Automatic / Hydro-Pneumatic Feed

Precise handle and lock case machining for window and door profiles.

Improving accuracy and speed in handle and lock preparation for sashes or frames. Ideal for manufacturers aiming to streamline drilling and milling into one precise, repeatable process.

– Combined handle drilling, lock case milling, and copy milling functions
– Automatic, controllable hydro-pneumatic feed for smooth drilling performance
– Infinitely adjustable drilling position using handwheel with mechanical digital readout
– Central handle-positioning system with manual centring unit and handwheel control
– Uniform handle seats set via lateral hinged stops for repeat precision
– Stable manual-feed milling unit runs on dual heavy-duty guides
– Milling height adjustable via turret stop for consistent results
– Integrated manual copy-milling function with top-mounted tracer pin
– Universal copying template for flexible machining layouts
– Two pneumatic clamping units with safety pre-clamping pressure

– High-frequency motor for lock case milling
– Additional hinged stops
– Custom copy-milling templates
– Handle drill and milling cutter sets

Variants:
– GSU 100: Standard configuration for automatic handle drilling and lock-case milling
– GSU-K 100: Includes integrated copy-milling unit with top tracer pin and universal template for pattern-guided machining (K = Kopierfräse, “copy router”)

N/A

A 25 A / A 25 AZ | Copy Router

Manual / Hydro-Pneumatic Feed

Flexible, universal copy milling for handle and lock case machining.

Carrying out flexible handle drilling, lock case, or custom slot machining on uPVC or aluminium profiles. Ideal for workshops that need versatility for short runs, repairs, or non-standard hardware configurations.

– Vertical handle-drilling unit with adjustable hydro-pneumatic feed for smooth control
– Height-adjustable drilling unit accommodates different profile sizes and hardware types
– Uniform handle seats adjustable via lateral hinged stops for consistent results
– Powerful milling head with top-mounted tracer pin for accurate copy milling
– Milling height adjustable via turret stop for repeat precision
– Two horizontally adjustable pneumatic clamps with pre-clamping pressure for secure holding
– Two-hand operation ensures operator safety
– Compact, durable design offers excellent performance and value

– Centring unit for profile alignment and central handle positioning (handwheel adjustable)
– Hinged stops for repeatable positioning
– Handle drill and lock-case milling cutter sets

N/A

A 23 A / A 23 AZ | Copy Router

Manual

Compact manual copy milling for handle and lock case machining.

Looking for a hands-on, reliable router for handle drilling, lock case milling, or special slotting tasks on uPVC and aluminium profiles. Ideal for smaller production runs, adjustments, or secondary machining tasks where precision and control matter most.

– Manual vertical handle-drilling unit operated via control lever for full operator control
– Adjustable drilling height accommodates different profile depths and hardware types
– Uniform handle seats set with lateral hinged stops for accurate repeatability
– Powerful milling head with top-mounted tracer pin for precise copy milling
– Milling height adjustable by turret stop for consistent depth
– Two horizontally adjustable pneumatic clamps with safety pre-clamping pressure
– Two-hand safety control for operator protection
– Also suitable for aluminium profile machining

– Centring unit with handwheel for exact profile positioning and central handle alignment
– Hinged stops for repeatable positioning
– Handle drill and lock-case milling cutter sets
– Spraying device for aluminium machining”

N/A

DB 1000 / DB 3100 / DB 3200 | Dowel Hole Drilling Units

Semi-Automatic / Electric Feed

Accurate, efficient dowel drilling for streamlined frame and sash assembly.

Improving assembly speed and accuracy by introducing precise dowel drilling into your production line. Ideal for frame preparation and connecting transoms or couplers quickly and consistently.

– Foot-switch-controlled profile clamping system and drill-feed activation for safe operation
– Adjustable drilling depth and feed speed for precision and flexibility
– Electric motor automatically switches off at the end of the drilling cycle to save energy
– Compact, space-saving design ideal for integration into existing workflows
– Durable, high-quality components built for long-term reliability
– Quick-clamp chuck accepts standard drill bits up to Ø 13 mm
– Consistent hole positioning improves assembly accuracy and fitment

– Manual or electronic length-stop system for repeatable positioning
– Triple depth switch-off for multi-depth drilling control
– Base frame UG 5000 for ergonomic operation
– Roller conveyor (Type RO) for smooth material handling

N/A

Milling Cutter Trolley

Accessory

Organised tool storage for an efficient production workflow.

Improving efficiency and organisation on the shop floor by keeping milling tools safely stored, easy to access, and ready for quick changeovers between profiles.

– Compact, space-saving trolley for convenient milling-cutter storage
– Sturdy, stable frame designed for long-term industrial use
– Holds up to 8 complete milling-cutter sets for fast access and tool rotation
– Smooth-rolling chassis with two fixed and two steering castors for mobility
– Integrated brakes on steering wheels for secure positioning during use

N/A

N/A

Don’t Wait

Contact Us For A Free Consult

I’m Ready